Pressure pipes

PRODUCTION OF PRESSURE PIPES IN THE PROVINCE OF PERUGIA

RICCINI produces a range of high density PEHD or low density PELD polyethylene tubes for the transport of drinking water or combustible gases, for irrigation, even for irrigated irrigation systems. A range of products for a range of industry and areas of use.
RANGE:

  • Class PN10 / SDR17 DN / OD 125-315 mm in bars 6 and 12 m
  • Class PN12,5 / SDR13,6 DN / OD 20-110 mm in rolls of 50 and 100 m and in bars of 6 and 12 m
  • Class PN16 / SDR11 DN / OD 20-315 mm in rolls of 50 and 100 m and in bars of 6 and 12 m
  • Class PN25 / SDR7.4 DN / OD 20-315 mm in rolls of 50 and 100 m and in bars of 6 and 12 m
  • Sleeve junction or with head-butt welding
Compliance with reference standards:

EN 12201-2: 2011
UNI EN 12201-2: 2012
UNI EN ISO 15494: 2005
D. M. 174: 2004
UNI EN 1622
Marks:

  • iiP-UNI
  • PiiP
  • B.V.

List Data sheet Certificates
Tubi a pressione Polier
loghi certificati qualità
High density polyethylene tubes (PEHD PE100) are available for use in pressurised fluid flow pipes with a head / head welding joint or a compression sleeve or electro-weldable sleeve. They are produced in various external diameters, including DN / OD from 20 mm to 110 mm (PN12.5 / SDR13.6 - PN16 / SDR11 - PN25 / SDR7.4) and are marketed in 100m 50 m or on sizes on demand. There are 6 m / 12 m bars for DN / OD 50 mm to 315 mm (PN10 / SDR17 - PN16 / SDR11 - PN25 / SDR7,4). Material compliant with UNI EN 12201-2: 2004, UNI EN ISO 15494, D.M. 174/04 and made with the iiP UNI or PiiP brand.
Other pictures

RANGE:

Class S8 / SDR17.6 DN / OD 90-315 mm in 6 and 12 m bars
Class S5 / SDR11 DN / OD 20-315 mm in rolls of 50 and 100 m and in bars of 6 and 12 m
Sleeve junction or with head-butt welding
Compliance with reference standards:

  • UNI EN 1555-2:2011
Marks:

  • iiP-UNI
  • PiiP
  • B.V.

List Data sheet Certificates
Polier Gas- immagine dell'area di immagazzinaggio
loghi certificati qualità
Production of high density polyethylene pipes (PEHD PE100), which can be used in underground pipes for the distribution of combustible gases, made with junction through head or sleeve welding.

Product available in DN / OD outer diameters from 20 mm to 110 mm in S5 / SDR11 or S8 / SDR17.6 classes. 25 m DN / OD for 20 to 75 mm DN / OD, available in 6 m or 12 m for DN / OD 63 mm to 315 mm and conforming to UNI EN 1555-2: 2004. Product that is branded iiP UNI.
Other pictures

RANGE:

Class PFA4 / SDR17 DN / OD 16-110 mm in rolls of 50, 100, 200 and 500 m
Class PFA6 / SDR11.6 DN / OD 16-110 mm in rolls of 50, 100, 200 and 500 m
Class PFA10 / SDR7.3 DN / OD 20-63 mm in rolls of 100 and 200 m
Sleeve jumper
Marks:

  • iiP-UNI
  • PiiP
  • B.V.
List Data sheet Certificates
Polier BD - immagine dell'area di immagazzinaggio
loghi certificati qualità
Production of low density polyethylene tubes (PEBDs) usable in pressurised fluid duct pipes for irrigation, fitted with a head joint or welded joint. They are available in DN / OD 16 mm to 110 mm outer diameters and 50 m, 100 m, 200 m or 500 m. Compatible product UNI 7990: 2004 and branded iiP UNI.

RANGE:

Class PFA4 / SDR17 DN / OD 16-110 mm in rolls of 50, 100 and 200 m
Class PFA6 / SDR11.6 DN / OD 16-110 mm in rolls of 50, 100 and 200 m
Sleeve jumper

Compliance with reference standards:

UNI 7990: 2015
List
Polier IRRIGA - USARE PER SEZ. FOTO IMMAGINE
loghi certificati qualità
Polyethylene pipes for pressure pipes for the distribution of water and gas fuels that offer excellent mechanical, chemical and hydraulic performance, even at low temperatures, guarantee reliability and safety. Corrosion phenomenon refractories

RANGE:

  • Class PFA4 / SDR17 DN / OD 16-32 mm in rolls of 25 and 50 m
  • Class PFA6 / SDR11.6 DN / OD 16-32 mm in rolls of 25 and 50 m
  • Sleeve jumper
Compliance with reference standards:

  • UNI 7990:2015
Marks:

  • iiP-UNI
  • PiiP
  • B.V.
List Certificates
Low density polyethylene tubes (PEBDs) can be used in pressurised fluid duct pipes for irrigation, made with welded head or sleeve joints. Formats available in DN / OD outer diameters from 16 mm to 32 mm and in 25 m or 50 m slats.

It is sold in a minimum quantity of a pallet made up of single-sided mats and conforms to UNI 7990: 2004, and is a trademark of the iiP UNI brand.

RANGE:

Class PN10 / SDR17 DN / OD 20-110 mm in rolls of 50 and 100 m
Sleeve jumper
Compliance with reference standards:

  • EN 12201-2:2011
  • UNI EN 12201-2:2012
  • UNI EN ISO 15494:2005
List
PEHD high density polyethylene pipes and PEBD low density pipes for irrigation pressure water distribution pipes, which offer excellent mechanical, chemical and hydraulic performance.

Reliable and safe, they are corrosion-resistant refractories and they have excellent resistance to "blow."

Share by: