Sewer networks

FOGNARIA NETS

We maketubes, fittings and special parts made of polypropylene high PPHM module or polyethylene high density PEHD, for the production of non-pressure sewer systems. All RICCINI products in this industry adopt a hydraulic sealing system to ensure homogeneity of quality level. They are interconnected with each other and with nets of different, cracking and micro-cracking materials for different applications (drainage, landfill, environmental remediation, viaduct, etc.).
RANGE:

  • Class SN8 KN / m2; DN / OD 125-400 mm; In bars of 6 m + glass
  • Class SN12 KN / m2; DN / OD 160-400 mm; In bars of 6 m + glass
  • Class SN16 KN / m2; DN / OD 160-400 mm; In bars of 6 m + glass
  • Fittings and special pieces DN / OD 125-400 mm
  • Elastomeric sealing with pre-injected and directional flow direction, fitted with a rigid anti-slip ring
ACCORDING TO:

  • EN 13476-2: 2007
  • UNI EN 13476-2: 2007 (type A1)
MARCHI: 

  • iiP
  • iiP-UNI
  • PiiP
Technical Catalogue List Data sheet Certificates

Tubo modello Tripplo+
logo 100% ecofriendly - riciclabile e top gamma
logo 100% ecofriendly - riciclabile e top gamma
icona ghiaccio
These are high strength polypropylene triple-layer high-strength tubes (PPHM), ideal for use in non-pressurized drainage ducts, fitted with a pre-insulated elastomeric gasket and glass jumper.
We carry out different requirements, with DN / OD outer diameter from 125 mm to 415 mm (including DN / OD 208 mm, 260 mm and 312 mm) in classes SN8 KN / m2, SN12 KN / m2 and SN16 KN / m2; In bars of 6.20 m, 3.20 m and 1.20 m.
We also provide all the range of dedicated fittings.
It is a product conforming to UNI EN 13476-1, UNI EN 13476-2 type A1 and ONR 20513, under the iiP UNI mark. Suitable for laying at -10 ° C.
Other pictures

RANGE:

  • Class SN4 DN / ID 200-600 mm in bars of 6 m + glass
  • Class SN8 DN / ID 160-400 mm in 6 m bar + glass
  • Class SN16 DN / OD 160-400 mm in bars of 6 m + glass
  • Fittings and special pieces DN / OD 125-400 mm
  • DN / OD covers 800-1000 mm
  • Glass junction with elastomeric gasket pre-inserted and oriented in the direction of the flow
Compliance with reference standards:

  • EN 13476-3: 2009
  • UNI EN 13476-3: 2009
  • HRN EN 13476-1: 2007
  • HRN EN 13476-3: 2009
  • HRS CEN / TS 13476-4: 2013
Marchi:

  • iiP
  • UNI
  • PiiP
  • ZIK
Technical Catalogue List Data sheet Technical manual Certificates

modello Kingcore
logo 100% ecofriendly - riciclabile e top gamma
logo 100% ecofriendly - riciclabile e top gamma
High modulated polypropylene (PPHM) wall tubes used for non-pressure underground drainage pipes, fitted with a tapping junction and a winded glass with pre-insulated elastomeric gasket.

Vine made with double coextruded wall in DN / ID internal diameters from 200 mm to 600 mm, in classes SN4 KN / m2 and SN8 KN / m2, in bars of 6,20 m, 3,20 m and 1,20 m. We also carry a full range of dedicated fittings and large diameter wells. These products comply with UNI EN 13476-1 and UNI EN 13476-3 type B standards; To the iiP UNI brand.
Other pictures

RANGE:

  • Class SN16 DN / OD 200-630 mm in 6 m + glass bars
  • Fittings and special pieces DN / OD 200-630 mm
  • Glass junction with elastomeric gasket pre-inserted and oriented in the direction of the flow
Compliance with reference standards:

  • - EN 13476-3: 2009
  • - UNI EN 13476-3: 2009
Trademarks:

  • IIP
  • UNI
  • Piip
List Data sheet Certificates
modello Sedici Plus
logo 100% ecofriendly - riciclabile e top gamma
logo 100% ecofriendly - riciclabile e top gamma
High modulus polypropylene wall modules (PPHM), which offer high resistance and can be used for non-pressurized bursting drainage pipes, fitted with a tapping junction and a winded glass with an elastomeric gasket pre-injected and oriented with respect to the direction of flow.

This product is available with double structured coextruded wall in DN / OD outer diameters from 200 mm to 630 mm, in the SN 16 KN / m2 rigidity class, in 6 m bar. Complete with range of fittings and large diameter wells. These are constructions conforming to the EN 13476-3 and UNI EN 13476-3, the iiP UNI and PiiP trademarks.
Other pictures

RANGE:

  • Class SN4 DN / OD 160-630 mm in 3 and 6 m bars + glass
  • Class SN8 DN / OD 160-630 mm in bars of 3 and 6 m + glass
  • Fittings and special pieces DN / OD 160-630 mm
  • Glass junction with elastomeric gasket pre-inserted and oriented in the direction of the flow
Marchi:

  • iiP
  • UNI
  • PiiP
  • ZIK
List Data sheet Certificates
modello Superfluid nero
logo 100% ecofriendly - riciclabile e top gamma
Realization of high density polyethylene (PEHD) double walled tubes (PEHD) suitable for non-pressurized underground drainage, with corrugated external wall, smooth internal wall.

It is also equipped with bars and is available in SN8 and SN4 classes. Complete with the range of fittings and is compatible for sleeve sleeve joints.
Other pictures

RANGE:

  • DN / OD 160 mm for insertion on DN / OD 250-1200 mm or on DN / ID 250-1000 mm
  • DN / ID 200 mm for insertion on DN / ID 300-1000 mm
  • Junction according to assembly (see Technical Sheet and List Price)
Compliance with reference standards:

  • Seal conforming to UNI EN 681/1 WC
  • Hydraulic seal conforming to UNI EN 13476-1 UNI EN 1277 method
List Data sheet

modello Simple Crown
Hydraulic high-sealing universal joint, made of polypropylene (PP) body, EPDM rubber parts, steel screwdrivers for sealing of sewage systems, connection to inspection wells, execution of inspections, inspections etc. It is used for connection of polypropylene (PP) pipes, polyethylene (PE), polyvinyl chloride (PVC), smooth or corrugated wall, normalized to external or internal diameters.

It is produced in the outer diameter DN / OD 160 mm or in the inner diameter DN / ID 200 mm for connection to pipes or wells inside or outside diameter between 250 mm and 1200 mm.
Other pictures

RANGE:

  • Class SN4 DN / OD 110-200 mm in bars of 3 and 6 m
  • Class SN8 DN / OD 110-200 mm in bars of 6 m
  • Fittings and special pieces DN / OD 110-200 mm
  • Glass junction with lip seal
CONFORM TO:
  • UNI EN 1401
TRADEMARKS:
  • IIP-UNI

List


Tubo PVC per reti fognarie
logo 100% ecofriendly - riciclabile e top gamma
logo 100% ecofriendly - riciclabile e top gamma
Share by: