Pressure Hoses

The RICCINI range of high density PEHD or low density PELD polyethylene pipes for the transport drinking water or combustible gases, under pressure, for irrigation, and automated irrigation systems.

Different products for all the different needs and sectors of use.

The POLIER high density polyethylene pipes of 3rd generation PEHD-PE100, dedicated to the transport under pressure of drinking water, represent the strengths of our company very well: reliability, strength, accuracy, safety … Polier is synonymous with quality in the field of water for decades, because it is produced according to the strict requirements of the regulations in force and is, since its inception, resistant to corrosion, very resistant to the so-called “water hammer” and rapid cracking (CPR), constant in mechanical, chemical, hydraulic performance, even at low temperatures.

As a demonstration of its level of excellence, the product can bear both the quality mark of the Italian Institute of Plastics, iiP, and that of Bureau Veritas, BV. Join with welding or compression sleeves or with head to head welding. Like almost all Riccini products, it is crackable and micro-crackable for uses other than those of the traditional sectors.

Colour: black with blue co-extruded strips.

RANGE:

Classe PN10/SDR17: DN/OD 125-315mm, in bars of 6m to 12m
Classe PN12,5/SDR13,6: DN/OD 20-110mm, in rolls of 50m or 100m; DN/OD 50-110mm, in bars of 6m to 12m
Classe PN16/SDR11: DN/OD 20-110mm, in rolls of 50m to 100m; DN/OD 50-315mm, in bars of 6m to 12m
Classe PN25/SDR7,4 DN/OD 20-110mm, in rolls of 50m to 100m; DN/OD 75-315mm, in bars of 6m to 12m
Coupling: sleeve or head to head welded

SPECIFICATION:

EN 12201-2:2011+A1:2013
EN 12201-2:2011+A1:2013-EN 1622:2006
UNI EN 12201-2:2013
UNI EN 12201-2:2013-UNI EN 1622:2006
UNI EN ISO 15494:2015
D.M. 174/2004

BRANDS:

iiP-UNI
PiiP
B.V. (BUREAU VERITAS)

Third generation PEHD-PE100 high density polyethylene pipe, for the transport of combustible gases under pressure. Manufactured according to the requirements of the current reference standard, POLIER GAS is synonymous with reliability and safety; excellent chemical and mechanical performance, great resistance to the stresses to which it is normally subjected in operation.

Junctions can be made with sleeves or with head to head welding. As for the POLIER pipe, as a demonstration of its level of excellence, the product can bear both the quality mark of the Italian Institute of Plastics, iiP, and that of Bureau Veritas, BV.

Colour: black with yellow

co-extruded stripes

RANGE:

Classe S8/SDR17,6: DN/OD 90-315mm, in bars of 6m to 12m
Classe S5/SDR11: DN/OD 20-110mm,in rolls of 50m to 100m; DN/OD 63-315mm, in bars of 6m to 12m
Coupling: sleeve or head to head welded

SPECIFICATION:

UNI EN 1555-2:2011

BRANDS:

iiP-UNI
B.V. (BUREAU VERITAS)

PEBD low density polyethylene pipe, for the construction of pipelines for the transport of fluids under pressure for irrigation. Made in accordance with industry standards, POLIER BD, thanks to the availability in different lengths, is able to meet all the needs of a varied and particular sector such as irrigation. POLIER BD, characterized by excellent chemical-physical and hydraulic performances, resistant to corrosion, proving its quality and value, boasts two distinct quality marks: one issued by the Italian Institute of Plastics, iiP, and the other issued by Bureau Veritas, BV, not unlike other products of the family POLIER brand (POLIER, POLIER GAS and POLIER GARDEN BD).

Colour: black

RANGE:

Classe PFA4/SDR17: DN/OD 16-110mm, in rolls of 50m, 100m, 200m and 500m
Classe PFA6/SDR11,6: DN/OD 16-110mm, in rolls of 50m, 100m, 200m or 500m
Classe PFA10/SDR7,3: DN/OD 20-63mm, in rolls of 100m or 200m
Coupling: sleeve

SPECIFICATION:

-UNI 7990:2015

BRANDS:

iiP-UNI
PiiP
B.V. (BUREAU VERITAS)

PEBD low density polyethylene pipe for the construction of pressure water distribution pipes in the irrigation sector. IRRIGA BD is manufactured in compliance with industry standards and has an articulated range of diameters and permissible operating pressures (PFA) most relevant to the market.

Characterized by optimal performance from a chemical, physical and hydraulic point of view, it is very resistant to the so-called “water hammer” phenomenon. IRRIGA BD is significantly corrosion-resistant, black to protect against UV radiation, even at very low latitudes.

Colour: black

RANGE:

Classe PFA4/SDR17: DN/OD 16-110mm, in rolls of 50m, 100m and 200m
Classe PFA6/SDR11,6: DN/OD 16-110mm, in rolls of 50m, 100m and 200m
Coupling: sleeve

SPECIFICATION:

UNI 7990:2015

PEBD low density polyethylene pipe for the realization of irrigation pipes. Manufactured in compliance with the sectoral standards in force, POLIER GARDEN BD is the best solution for all situations in which the use of shorter rolls are required.

Packed in the minimum size of a pallet of coils of a single diameter, POLIER GARDEN, as well as other products of the POLIER family (POLIER, POLIER GAS, POLIER BD) can bear the iiP quality mark issued by the Italian Institute of Plastics.

Colour: black

RANGE:

Classe PFA4/SDR17: DN/OD 16-25mm, in rolls of 25m or 50m; DN/OD 32mm, in rolls of 50m
Classe PFA6/SDR11,6: DN/OD 16-25mm, in rolls of 25m or 50m; DN/OD 32mm, in rolls of 50m
Coupling: sleeve

SPECIFICATION:

UNI 7990:2015

BRAND:

iiP-UNI

PEHD high density polyethylene pipe for the construction of pressure water distribution pipes in the irrigation sector. IDROPOLIER PN10 HD is manufactured in compliance with industry standards and is available in nominal working pressure class PN10, in all the most important diameters for the sector.

Characterized by excellent chemical, physical and hydraulic performance, it has great resistance to the so-called “water hammer” phenomenon. IDROPOLIER PN10 HD is particularly resistant to corrosion, and is manufactured in black for the best protection against UV radiation, even at lower latitudes.

Colour: black

RANGE:

Classe PN10/SDR17: DN/OD 20-110mm, in rolls of 50m or 100m
Coupling: sleeve

SPECIFICATION:

UNI EN ISO 15494:2005